Wichita Falls Window Replacement provides professional wood and clad-wood windows in Wichita Falls, TX for residential and commercial properties across the Texoma region. More than four thousand homes in this city were built in 1939 or earlier, and their windows were made of old-growth wood that is better than anything you can buy today. Ripping those out is usually the wrong instinct, and it is almost always the expensive one.
A hundred-year-old double-hung fails in predictable places. The bottom rail takes water because the glazing putty cracked and let it in. The joints at the meeting rail open. The sill weathers. None of that is structural failure of the sash, and none of it needs a new window to fix.
The repair sequence is unglamorous and it works. Rake out the failed putty, prime the rabbet with an oil primer so the wood does not draw the oil out of the new compound, bed the glass on fresh linseed-oil glazing compound, and point it. Consolidate soft end grain with a penetrating epoxy and rebuild the profile rather than replacing the rail. Then paint the putty line with a lap onto the glass so water leaves the joint.
Cost-wise this is not close. A full sash rebuild on a period double-hung runs a fraction of the price of a matched clad replacement, and it keeps the wavy cylinder glass and the true divided lights that the replacement would imitate with a stuck-on grille. On a house near Depot Square that is not a sentimental point, it is a resale one.
Clad-wood replacement earns its place in two cases. New construction and additions, where you want an aluminum or fibreglass exterior skin over a wood interior and nobody is trying to match a hundred-year-old profile. And genuine end-of-life sash, where the rail-to-stile joints have opened past the point that glue and a dowel will hold and the tenons have gone soft.
If you go that way, the thing to interrogate is the cladding joint at the corner, not the wood. Extruded aluminum cladding with a mitred and sealed corner sheds water. Roll-formed cladding with a lapped corner traps it, and the rot starts on the inside where you will not see it for a decade. Ask which one you are buying.
Interior finish is the other decision people rush. Factory-primed pine is fine if you intend to paint it. If you want a stained interior, order the species you actually want from the factory rather than staining primed pine on site. A site stain over factory primer never looks right, and once it is on there is no undoing it short of stripping the sash.
We are happy to do either job. What we will not do is walk into a nineteen-twenties house, quote a full clad replacement without opening a single sash, and let you believe the originals were beyond saving. If they can be repaired for a third of the money, you should hear that first and decide for yourself.
Our licensed and insured team brings the right materials and equipment to every job — spiral sash balances, block-and-tackle balance cartridges, cord-and-weight jamb pockets, moisture-saturated desiccant in the spacer, butyl primary edge seals, setting blocks at the quarter points — and backs the work with a written workmanship warranty. We serve Wichita Falls and nearby communities including Burkburnett, Iowa Park, Electra, Pleasant Valley.
What We Handle
Everything our wood and clad-wood windows in Wichita Falls covers
One crew, one point of contact, and the full range of wood and clad-wood windows work in Wichita Falls, TX. If it is on this list we do it in house rather than handing it to a subcontractor:
- wood window repair Wichita Falls
- clad wood windows Wichita Falls TX
- sash reglazing
- linseed oil glazing compound
- epoxy wood consolidant
- historic window restoration
- true divided lite windows
- aluminum clad wood windows
- rotted window sill repair
- parting bead replacement
- period home windows Wichita Falls
- wood window putty repair
- extruded aluminum cladding
- stained interior window sash
- old growth wood sash
Not sure which one describes your situation? Describe it in plain words and we will sort it out — or browse the rest of our Wichita Falls services.
Materials, equipment and how we do wood and clad-wood windows
The difference between wood and clad-wood windows that lasts and wood and clad-wood windows that gets redone in three years is almost always preparation and materials, not the finish you see on day one. We work with spiral sash balances, block-and-tackle balance cartridges, cord-and-weight jamb pockets, moisture-saturated desiccant in the spacer, spec them to the job instead of to the invoice, and write the material grades into the free estimate so you know exactly what you are buying.
Every Wichita Falls job runs the same way: site walk and measurements, written scope and fixed price, protection of the surrounding area, then the work itself with a daily clean-up. Years of window work in the Texoma region means we have already met whatever your property is going to throw at us — awkward access, older construction, an HOA with opinions.
Where we do wood and clad-wood windows outside Wichita Falls
Wichita Falls Window Replacement covers Wichita Falls and the surrounding communities of the Texoma region. Crews run out to the same nearby cities every week, so an out-of-town job does not mean an out-of-town price.
- Wood and Clad-Wood Windows in Burkburnett, TX — Wichita County, population 10,939 at the 2020 census
- Wood and Clad-Wood Windows in Iowa Park, TX — Wichita County, population 6,535 at the 2020 census
- Wood and Clad-Wood Windows in Electra, TX — Wichita County, population 2,292 at the 2020 census
- Wood and Clad-Wood Windows in Pleasant Valley, TX — Wichita County, population 357 at the 2020 census
- Wood and Clad-Wood Windows in Lakeside City, TX — Archer County, population 1,082 at the 2020 census
- Wood and Clad-Wood Windows in Holliday, TX — Archer County, population 1,524 at the 2020 census
Start on the Wichita Falls Window Replacement homepage for a free estimate, or call (844) 511-2320 and describe the job.
Why Wichita Falls Chooses Wichita Falls Window Replacement
- ✓We quote the part before the product. A spiral balance, a tandem roller or a length of pile weatherstrip fixes most of what people here are told needs a new window, and we would rather sell you that.
- ✓We measure glass properly, which is why our insulated units fit first time: sight size plus bite, unit thickness, spacer type, and which surface carries the low-emissivity coating.
- ✓We say out loud when a repair is throwing good money after bad. A bowed vinyl frame, a racked casement sash or an aluminum house you are already fixing twice a year gets a replacement quote and the reasoning in writing.
- ✓We will not sell impact-rated glazing three hundred miles from salt water. If you want protection from a tornado we refer you to a shelter builder, because a window is not a shelter and we are not going to pretend otherwise.
The standards behind wood and clad-wood windows
Quality here is not a matter of opinion — it is written down. The wood and clad-wood windows work we do in Wichita Falls follows published industry standards: NFRC sets the U-factor and SHGC ratings on every window label, and ENERGY STAR defines the efficiency thresholds by climate zone. If a contractor cannot tell you which standard a detail comes from, that is worth asking about before you sign.
Every wood and clad-wood windows project in Wichita Falls gets the same attention, whether it is a single room or a full commercial job. We show up on schedule, keep the site clean, and stand behind the work — the estimate is free and there is no pressure.
Ready to get started? Call (844) 511-2320 for a free wood and clad-wood windows free estimate in Wichita Falls, or request a quote and we'll get right back to you.